Bowman EH200 Marine Heat Exchanger & Header Tank (70HP)

Bowman EH200 Marine Heat Exchanger & Header Tank (70HP)

Name: Bowman EH200 Marine Heat Exchanger & Header Tank (70HP)
SKU: 201643

Product code: 201643
Manufacturer SKU: EH200-3401-3

The Bowman EH200-3401-3 marine three pass header tank heat exchanger is typically suitable for 52kW / 70HP engines.There is a raw water input connection for 3/4" BSP one end and a raw water1 Read more

Description

The Bowman EH200-3401-3 marine three pass header tank heat exchanger is typically suitable for 52kW / 70HP engines.

There is a raw water input connection for 3/4" BSP one end and a raw water output connection for 3/4" BSP on the other end.

The heat exchanger is supplied with counter flanges, stud bolts and gaskets for the fresh water circuit. You will need to fabricate a suitable connection for the fresh water coolant input and outputs of the heat exchanger.

Please note: This heat exchanger could be supplied with either composite or brass end caps depending on stock.

Bowman recommend NOT fitting zinc anodes because the tubes used in the construction of the heat exchangers are copper-nickel alloy, and as such they do not require a zinc anode. It is possible that if a zinc anode is fitted it can actually destroy the copper-oxide film built up by the tube as a natural defence, which can allow the tube material to be attacked.

Specifications

Capacity Description	Raw Water Volume: 0.60 Litres, Engine Water Volume: 2.20 Litres, Header Tank Capacity: 1.32 Litres
Flow Rate Description	Raw water flow: Maximum 54 litres per minute
Material	Aluminium LM6M Body, Cupro Nickel Tubestack & Gun Metal End Covers
Primary Construction	Aluminium
Fixing Hole Size	M8 x 12
Maximum Horsepower Description	70HP (52kW)
Pressure Rating	Filler Cap: 10.8 PSI (0.75 Bar / 75kPa)
Inlet Outlet	Raw Water Inlet: 3/4" BSP, Raw Water Outlet: 3/4" BSP, Engine Water Port Bore: 30mm
Brand	Bowman
Model	EH200-3401-3
Height Description	200mm including pressure cap
Width	110mm (4.3")
Length	346mm
Operating Temperature	100°C Maximum
Dimensions	Distance Between Mounting Hole Centres: 120mm x 52mm
Country of Origin	United Kingdom